Edge Compute
Last updated
Last updated
To enable and configure Edge Compute functionality in Portainer, select Settings from the menu then select Edge Compute.
To learn how to use our Edge Compute functionality, please refer to the Edge Compute section of this documentation.
In this section you can add new Edge Devices by clicking Add device. Use the following options to configure and enable Edge Compute functionality within Portainer.
Enable Edge Compute features
Toggle this on to enable Edge Compute functionality including Edge Device features.
Portainer API server URL
Enter the default URL and port of your Portainer Server instance as it will be seen from your Edge environment. If using a FQDN, ensure that DNS is properly configured to provide this. This value can be overridden when manually deploying an Edge Agent. This feature is only available in Portainer Business Edition.
Portainer tunnel server address
Enter the default address and port of your Portainer Server instance's tunnel server as it will be seen from your Edge environment. If using a FQDN, ensure that DNS is properly configured to provide this.
In most cases, this will be the same address as the Portainer API server URL, but without the protocol and on port 8000.
This value can be overridden when manually deploying an Edge Agent.
This feature is only available in Portainer Business Edition.
Enforce use of Portainer generated Edge ID
Enable this option to require that the Edge ID used by an Edge Agent deployment exist within Portainer's database (in other words, have an environment with the matching ID already created) in order to connect.
When you are done, click Save Settings.
This section defines options that apply how Edge Agents sync with the Portainer Server instance.
Edge agent default poll frequency
Select how often Edge Agents check in with the Portainer Server instance.
Use Async mode by default
Toggle this on to enable Async mode for Edge Devices. Async mode disables the tunnel between the Edge Device and the Portainer server instance. When Async mode is enabled, individual values can be set for the poll, ping, snapshot frequencies for Edge Devices, and browsing the device is done via snapshots.
The following options will appear when Use Async mode by default is enabled above.
Edge agent default poll frequency
When Async mode is disabled, use this option to set how often Edge Agents check in with the Portainer Server instance.
Edge agent default ping frequency
When Async mode is enabled, use this option to set how often Edge Agents ping back to the Portainer Server instance.
Edge agent default snapshot frequency
When Async mode is enabled, use this option to set how often Edge Agents updates the snapshot with the Portainer Server instance.
Edge agent default command frequency
When Async mode is enabled, use this option to set how often Edge Agents check with the Portainer Server instance for pending commands.
When you are done, click Save Settings.
In this section you can configure how automatic Edge environment configuration functions as well as customize and retrieve your Edge agent deployment script, for use when preloading Edge Devices with a Portainer Edge Agent container and configuration.
Disable Edge Environment Waiting Room
Toggle this on to disable the waiting room feature for Edge devices. This will allow any Edge Device that connects to the Portainer instance to automatically associate with Portainer. We recommend leaving this off (the waiting room enabled).
Configure the options and select the platform (Linux or Windows) to generate your Edge agent deployment scripts.
Edge ID Generator
Provide a one-line script that will be used to generate a unique ID for your Edge devices. For Linux, an example would be using the uuidgen command.
Nomad Authentication Enabled
If you have selected a Nomad environment, toggle this to enable authentication.
Nomad Token
If Nomad authentication is enabled, define the Nomad token to use.
TLS
Toggle this on if your Nomad installation uses TLS.
Environment variables
Define a comma separated list of environment variables that will be sourced from the Edge device for use in Portainer.
Allow self-signed certs
Toggle this to permit the use of self-signed certificates for the communication between the Edge Agent and the Portainer server.
Select the environment of your deployment and click Copy to copy the script to your clipboard.
This section controls the configuration of the Intel OpenAMT functionality in Portainer.
Enable OpenAMT
Toggle this option on to enable Portainer's OpenAMT functionality. This can only be enabled when Enable Edge Compute features is toggled on, and when on will reveal the below fields.
MPS Server
Enter the FQDN or IP address of your MPS server.
MPS User
Enter the username used to connect to your MPS server.
MPS Password
Enter the password for the MPS User defined above. The password must be between 8 and 32 characters and include at least one upper case letter, at least one lower case letter, at least one base-10 digit and at least one special character.
Domain Name
Enter the fully-qualified domain name associated with the provisioning certificate.
Provisioning Certificate File (.pfx)
Click Upload file to upload your PFX-format certificate. The PFX must contain the private key. On AMT 15 based devices you must use SHA2.
Currently supported CAs are Comodo, DigiCert, Entrust and GoDaddy.
Provisioning Certificate Password
Enter the password for the provisioning certificate. The password must be between 8 and 32 characters and include at least one upper case letter, at least one lower case letter, at least one base-10 digit and at least one special character.
When you have finished making changes, click Save Settings.
This section controls the configuration of the FDO functionality in Portainer.
Enable FDO Management Service
Toggle this option on to enable Portainer's FDO functionality. This can only be enabled when Enable Edge Compute features is toggled on, and when on will reveal the below fields.
Owner Service Server
Enter the address and port of your Owner Service Server.
Owner Service Username
Enter the username used to connect to your Owner Service Server.
Owner Service Password
Enter the password associated with the username above.
When you have finished configuring your FDO setup, click Save Settings.
Here you can add, edit and manage the device profiles available for use during FDO device setup. A device profile consists of a script that is run on the device when first provisioned by the FDO system, and can be used for initial installation and configuration of the device, for example installing Docker and deploying the Portainer Edge Agent.
To create a new profile, click Add Profile. To edit an existing profile, click the name of the profile you want to edit. You can also check the box next to a profile and click Duplicate to create a copy of it, and Remove to delete the profile.
Device profiles consist of a unique name and the contents of the script. Use the Web editor to create or edit your script.
Once you've finished with your script, click Save Profile.
